Extron（爱思创） DVI 201 Tx/Rx 发送器/接收器组
Extron（爱思创） DVI 201 Tx/Rx 发送器/接收器组
DVI 双绞线延长器
Extron（爱思创） DVI 201 Tx/Rx 发送器/接收器组是一组发送器和接收器，可以传输 DVI 或 HDMI 信号，并且传输距离大大超过标准 DVI 电缆的距离限制。与两根经济且方便集成的 CAT 5、CAT 5e、CAT 6、CAT 7 类或 Extron STP201 电缆相连接，Extron（爱思创） DVI 201 Tx/Rx 发送器/接收器组发送器和接收器配合使用时可以将 HDTV 和 XGA（1024X768）的单链路 DVI-D 或 HDMI 信号传送超过 200''（60 m）的距离
特性
通过两根 CAT 5 类电缆发送单链路 DVI-D/HDMI 和 RS-232 信号
通过标准 CAT 5e 电缆将 720p、1080i 和 XGA（1024x768）信号传送 超过 200''（60 m）的距离，将 1080p/60 和 1920x1200 信号传送超过 100''（30 m）的距离
Extron STP201 数字双绞线电缆可针对外界干扰提供额外保护，从而增加 信号传输的总体距离
DVI 输入环通
支持 DDC 和 HDCP
发送器和接收器的远程供电
双向 RS-232/红外直通
型号 产品说明 产品编号
Extron（爱思创） DVI 201 Tx/Rx 发送器/接收器组 60-734-03
Extron（爱思创） DVI 201 Tx 发送器 60-734-12
Extron（爱思创） DVI 201 Rx 接收器 60-734-13
快速参考
• Extron（爱思创） DVI 201 (宣传册)
• DVI 201 and DVI 201 Decora User Guide (用户手册)
随附附件
• PS 1210 C 12V, 1A Power Supply featuring ZipClip™, Captive Screw 70-775-01
• DVID SL Pro/6 DVI Cable: Single Link DVI-D Male to Male - 6'' (1.8 m) 26-649-06
可选附件
• RFF 系列 基础型机架空白面板套件
• DVID DL Pro 系列 双链路 DVI-D 插头对插头电缆
• STP201 26 AWG 屏蔽数字双绞线电缆
• STP RJ-45 插头 用于 Extron STP201 数字双绞线电缆的屏蔽 RJ45 插头
• HDMI DVI-D 系列 标准速度 HDMI 至 DVI-D 电缆
• HDMIF-DVIDM HDMI 插座对 DVI-D 插头适配器
• HDMIM-DVIDF HDMI 插头对 DVI-D 插座适配器
• HDMIF-DVIDF HDMI 插座对 DVI-D 插座适配器
• MBU 125 Low-Profile Mount Kit for 1/4 and 1/2 Rack Width, Two-Piece Enclosures
• MBD 129 Through-Desk Mount Kit for 1/4 or 1/2 Rack Width, Two-Piece Enclosures
• PMK 200 Pole Mount Kit for One 1/4 or 1/2 Rack Width, Two-Piece Enclosures
• RSF 123 3.5" 深的机架搁板套件、
技术参数：
Extron（爱思创） DVI 201 Tx/Rx 发送器/接收器组
NOTE *Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output.
Also, an optional Extron HDMI-to-DVI adapter is required in order to transmit a CEC signal.
Video
Maximum data rate 4.95 Gbps (1.65 Gbps per color)
Maximum pixel clock 165 MHz
Resolution range 1920x1200 or 1080p @ 60 Hz
Formats RGB and YCbCr digital video
Standards DVI 1.0, HDMI
Video input and loop through — transmitters
Number/signal type 1 single link DVI-D (or HDMI*) input
1 single link DVI-D (or HDMI*) local loop-through
Connectors
DVI 201 Tx 2 female DVI-D
Interconnection between transmitter and receiver
Connectors 2 female RJ-45 per unit for 2 cables connecting the transmitter and receiver
Termination standards TIA/EIA T568A or T568B
Signal transmission distance
1920x1200 or 1080p @ 60 Hz
Extron STP201 cable Up to 150'' (45 m)
CAT 5/5e/6 STP Up to 125'' (38 m)
CAT 5/5e/6 UTP Up to 100'' (30 m)
1024x768 or 720p/1080i @ 60 Hz
CAT 5/5e/6 UTP or STP or Extron STP201 Up to 200'' (60 m)
NOTE The transmission distance varies greatly depending on the signal resolution and on the type of cable, graphics card, and display used in the system.
NOTE Shielded twisted pair cable provides added protection from outside interference and increases overall signal transmission distance. Extron strongly recommends using shielded twisted pair for optimal performance.
Video output — receivers
Number/signal type 1 single link DVI-D (or HDMI*)
Connectors
DVI 201 Rx 2 female DVI-I
Control/remote — external device (pass-through)
Serial control port input
Transmitter RS-232 via (1) 3.5 mm, 3 pole captive screw connector
Receiver 1 set of proprietary signals on a female RJ-45 jack
Serial control port output
Transmitter 1 set of proprietary signals on a female RJ-45 jack
Receiver RS-232 via a 3.5 mm, 3 pole captive screw connector
NOTE Protocol is mirrored between the transmitter and the receiver.
Serial control pin configurations Captive screw connectors: 1 = Tx, 2 = Rx, 3 = GND
General
Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
Power consumption
DVI 201 Tx 2.8 watts, 12 VDC
DVI 201 Rx 4.0 watts, 12 VDC
NOTE Each transmitter or receiver can be powered either locally by an external power supply or remotely by receiver or transmitter on the other end of the CAT 5/5e/6 or Extron STP201 cable.
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, no vents
Thermal dissipation 9.5 BTU/hr
Mounting
Rack mount Yes, with optional 1U rack shelf
Furniture mount Yes, with optional through-desk mounting kit
Pole mount Yes, with optional mounting kit
Enclosure type Metal
Enclosure dimensions 1.0" H x 4.3" W x 3.0" D (quarter rack wide)
(2.5 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.)
Product weight 0.5 lbs (0.3 kg)
Shipping weight 3 lbs (2 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety CE, c-UL, KCC, UL
EMI/EMC CE**, C-tick, FCC Class A**, ICES, VCCI
NOTE **CE and FCC testing is conducted with STP (shielded twisted pair) cable.
Warranty 3 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
|
